Salt-Attack Descaler

Price range: $89.99 through $169.99

Salt-Attack Descaler Cooling System Cleaner & Marine Growth Remover – Concentrate

Description

Descaler by Salt-Attack is a safe, biodegradable, non toxic, high strength marine growth remover and cooling system cleaner.

Descaler is fast, safe and cost effective alternative to a mechanical cleaning of salt water cooled cooling systems.

Designed to be circulated through seawater cooling systems to dissolve barnacles, mussels, calcium, rust, lime & all other mineral deposits.

Salt-Attack’s Descaler removes marine build up from:

  • Heat exchangers
  • Air conditioning cooling systems
  • Bow thrusters
  • Sea strainers
  • Seacocks
  • Piping within the cooling system
  • Pumps

Warning: Salt Attack Descaler should only be left in your engine’s cooling system for up to a maximum of 3 hours.

 

Features:

  • Remove and dissolve: barnacles, calcium, rust, lime and other mineral deposits
  • Super concentrated cleaner: Most applications can be safely completed within 3 hours
  • Descales marine growth: seacocks and sea strainers, heat exchangers, sea water cooled exhaust systems, refrigeration and A/C cooling systems
  • Mixes at 5 parts water to 1 part Salt-Attack Descaler. 4L of concentrate makes 20L of descaler

Use 2 litres of Salt-Attack Descaler super concentrate mixed up at 5 parts water to 1 part Salt-Attack to make up to 10 litres, in a drum or drums.

To descale cooling system, firstly turn off seacock then attach hose inline between seacock and water strainer and place pick up hose in bucket. Start engine and run all the mix into cooling system then turn engine off and leave in cooling system for 3-4 hours. Reconnect any water pipes disconnected and turn seacock on. Check for leaks then restart engine, allowing it to run for 10 minutes to flush out dissolved marine growth and calcium.

For corrosion protection to cooling system and to stop salt build ups regularly flush with Salt-Attack using the Direct Injection Kit.