JustTeak Teak Sealer

JustTeak Teak Sealer

$109.99$324.99

1L or 4L size – Latest generation of marine grade penetrating teak oil that provides superior, long-lasting performance compared to traditional teak oil.

Choice of Clear or Natural (slight yellow tone) finish.

Plus a FREE wooden stirrer stick

** DG Item **   Available for Click and Collect only

Clear
View cart

Description

Beautiful, natural finish for your teak decking and furniture.

JustTeak Teak Sealer is a marine grade, penetrating teak oil. It is designed to give superior performance compared to a traditional teak oil. With its advanced formulation, it provides protection against the sun, rain, staining, mould and mildew, while giving a beautiful natural long-lasting finish. The easy and fast-drying application will have your teak quickly and safely looking brand new.

Choice of Clear or Natural (slight yellow tone) finish.

Coverage  Application  Coats  Recoat  Walk On  Rain   Ready
5.5m² (60ft²) coverage per litre when applying 2 coats  Rag, brush or   pad applicator 2 – 3 coats depending on  the absorbency of the teak After touch-dry: 15-30  minutes – at 23°C (73°F)  3 hours at 23°C (73°F)  6 hours at 23°C (73°F)

Preparation: Ensure teak is dry. For best results apply in temperatures above 10°C (50°F) on a dry, sunny day.

Mask off surrounding area to be coated, this will help to make clean-up easy.

  • Freshly sanded teak:
    Ensure teak is clean and
    free from dust and dirt
    before application.
  • Cleaned and brightened teak: Ensure teak is completely dry before applying Teak Sealer
  • Aged/grey teak or
    previously coated teak:
    To restore natural colour, Clean with JustTeak Teak Cleaner then Teak Brightener to remove old coatings, dirt and deposits that have turned the teak grey.
  • New teak: Allow teak to weather for 4-6 weeks.

Application:

  1. Shake then stir teak sealer prior to use.
  2. Apply the sealer by either rag, brush or pad applicator, along the length of the board to ensure even colouring and to avoid line marks. TIP: Stir product periodically whilst applying to ensure even colouring.
  3. Apply generously and allow to dry. Soak up any areas that have not absorbed the sealer.
  4. When touch dry, apply 1-2 subsequent coats until teak stops absorbing the sealer.
  5. To clean equipment and spills simply use white spirits or xylene.

JustTeak Technical Data Sheet

    You've just added this product to the cart: