Fusion FM 10″ Marine Subwoofer – Flush Mount

$359.00

Clear audio, clean aesthetics – all class. The Fusion FM series subwoofers are designed to enhance your on-water listening experience with quality bass, in a sleek and minimalist aesthetic.

Comes with your choice of either black or white grille, so you can perfectly match your boat’s aesthetics.

Clear
View cart

Description

DESIGNED AND ENGINEERED TO TRUE-MARINE™ STANDARDS

Built on the True-Marine design philosophy from Fusion, the FM Series subwoofers have an IP65 rating for protection against dust and water ingress and have been tested to a high level of protection against salt fog, temperature, vibration and UV.

DESIGNED TO COMPLY WITH ISO12216

Tested to international standards for pressure and water ingress, the FM Series subwoofers are designed and built for superior quality and robustness.

VERSATILE SYSTEM INTEGRATION

Built for system versatility and ease of integration, you can connect your FM Series subwoofer directly to a 2.1 audio zone compatible system such as the Apollo™ Series without the need for an external amplifier – reducing system cost and simplifying installation.

INJECTION-MOULDED POLYPROPYLENE CONE

By using a water-resistant IMPP cone, Fusion is able to produce defined, high-resolution low-frequencies from the excellent self-damping and bass reproduction.

LARGE DIAMETER VOICE COIL

With an increase in real power and efficiency, the large diameter voice coil delivers a truly high-quality sound experience.

HIGH-QUALITY BASKET CONSTRUCTION

The basket is constructed using high-quality engineered plastics to deliver enhanced durability when exposed to the marine environment.

INNOVATIVE FLUSH-MOUNT DESIGN

The FM Series subwoofers are designed to be flush-mounted with a mounting profile no thicker than 3 mm for a visually appealing, near flat finish. The sleek and minimalistic aesthetic allows the FM Series subwoofers to blend in seamlessly with your boat.

NON-INTRUSIVE MOUNTING SYSTEM

The FM Series subwoofers feature an intelligent mounting system. Simply place the subwoofer into the cutout, tighten the screws and the subwoofer legs will tighten against the panel, keeping it in place without needing to create any screw holes in your boat.

General

Physical dimensions (Diameter x Depth) 11.18″ x 5.49″ (284 x 139.5 mm)
Water and dust rating IP65
Speaker size 10″
Peak power (Watts) 400 W
RMS power (Watts) 120 W
Sensitivity (1 W / 1 m) 87 dB
Magnetic structure 41 oz
Frequency response 30 Hz – 2 kHz
Nominal impedance 4 ohms
Recommended amplifier power (RMS) 40-300 W
Operating temperature range 32° to 122° F (0° to 50° C)
Voice coil diameter 1.5″
Cone material Polypropylene cone with rubber surround
Compass-safe distance 150″ (381 cm)
Warranty 3 years

Mounting dimensions

Mounting diameter clearance 10.59″ (269 mm)
Mounting depth clearance 5.51″ (140 mm)

Optimum enclosure recommendations

Sealed enclosure volume 1.4 cubic ft (40 L)

  • One subwoofer
  • Documentation